• Wood handling
• Chemical pulping
• Recausticizing
• Pulp drying
• Process overview
• Improvement products
• Air filter
• Bale press – Belt guide
• Bale press – Expander pin
• Bale press – Photocell upgrade PR-15
• Bale press – New pre-press and return cylinder design
• Bale stack binder – Upgrade packages for type BBA-2124
• Bale stack binder – Upgrade packages for the press unit
• Bale stacker – Upgrade package for type SLA
• Cutter Layboy
• Cutting arm with replaceable cutting edge
• DryWay Wet end
• Exchange valve for PFC/PAM presses
• Exchange valve V5
• FillMax
• Folding machines – Upgrade packages for type VKC
• Hydraulic hoses instead of pipes
• Improved oil cooler/filter unit
• Improved used oil tank
• New downfeed device for slab press
• New main pumps
• New main valve unit
• Optimized oil filtration
• Robotyer – Upgrade packages for type BBE-1006
• Robotyer – Upgrade packages for type BBE-2124
• Slab press – Press stamp with separate hydraulic cylinder
• Slab press – Rebuild of infeed motors
• Slab press – Rebuild of press moulds
• Tension bars
• Tying machines – Upgrades for type BBA/BBC-1207
• Wire Cage
• Spare and wear parts
• Workshop services
• Agreements
• Mill site services
• Filter fabrics and services
• Mechanical pulping
• Fiberboard
• Recycled fiber

Upgrade packages for Robotyer type BBE-2124

We can offer a number of upgrade packages that will ensure more reliable operation of Robotyer BBE-2124.

• Tension absorbers
  The tension absorbers even out the pull during infeeding, ensure that the wire tension is stable and reduce the risk of wire knots forming in the wire accumulator. This will reduce the incidence of problems in the twist drive unit and the rail system. The fixed guide wheels in the feeding unit are replaced with a flexible tension absorber.
  
  
• Grease lubrication equipment
  New lubrication system for the twist drive unit in the Robotyer, that ensures more reliable operation, less wear and an improved environment as a result of reduced oil spillage. Earlier models of the Robotyer did not include lubrication equipment.
  
  
• Change from pressure intensifier to Quatro cylinders
  The existing pressure intensifier and cylinders for the clutch- and cutting unit are replaced by Quatro cylinders. As the pressure is built inside the cylinders, it is possible to reduce it. This will result in improved safety, prolonged component life and more reliable operation. New cover plates are mounted.
  
  
• New wire accumulator
  The new wire accumulator improves wire control, which results in more reliable operation and prevents the forming of wire knots in the machine.
  
  
• New type of hatch with inspection window for the feeding unit
  The existing hatch is replaced by a new hatch with an inspection window, which makes it possible to observe the yoke and feeding wheel during operation.