Webinar: Maximizing primary gyratory uptime and performance with chamber optimization

Webinar

Type

Video

Language

English

Your information is safe. Check our privacy notice for more details.

Webinar recording

When it comes to maximizing annual production from your Primary Gyratory, what are your options? How much more uptime can be realized by optimizing the design of the liners? Does the current chamber match the desired power / capacity / product required in the process? Reducing the number of concave segments and using installation tooling can dramatically reduce required installation time. More wear resistant alloys and optimized designs can increase the life of each concave campaign. There are also improvements that can be made to reliability and efficiency by optimizing the chamber geometry.

After this webinar, you will:  

Understand concave design, mantle design and tooling options to minimize reline times
Understand concave and mantle design options to maximize liner lifetime
Gain awareness of how chamber design options improve process and application challenges

Webinar duration is 1 hour including Q&A. This webinar will be in English.

Complete the form to watch the webinar recording!

Timothy Brader

Senior Product Support Specialist – Consumables - Crusher Wears

Based out Waukesha, Wisconsin, Timothy Brader hold a bachelors degree of Engineering from the University of Wisconsin Platteville. He has held multiple roles within Metso Outotec including working as a Lab Assistant / CO-OP at the Metso Research and Test Center in South Milwaukee as well as acting as a Global Product Support Engineer for Metso Outotec’s Crushers Wears for 7 years. Currently, he is the Milwaukee Technology Center Manager for Crusher Wears Product Support since 2017.

Rafael Yanata

Product Manager – Mining Crushing Solutions

Rafael Yanata is Metso Outotec´s Global Product Manager for Mining Crushing Solutions, based in Santiago, Chile. He combines his wear parts and crushing expertise with 9+ years of experience between product support engineering and managing crusher wear parts globally. During this time, he has been involved in crusher wear designs, chamber optimization, application support, wear follow up work and most recently managing standard and customized wear parts that deliver solutions to Metso Outotec’s customers. By sharing his experience, Rafael can contribute to any improvement projects involving comminution processes in the mining industry.